Brümate Trio Freezer Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For the Brümate Trio system, the freezer and adapter component isn't sold seperately so I 3d modelled one.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
For the Brümate Trio system, the freezer and adapter component isn't sold seperately so I 3d modelled one. You will need to confirm that it holds water and if so, then a plastic plug will need to be used to seal.
I'm using a MarkePI M2030X Dual Filament Printer but settings should still work with other printers.
Quality
Layer Height: 0.1mm
Shell Thickness: 0.8mm
Fill
Fill Density: 20%
Speed and Temperature
Print Speed: 40mm/s
Printing Temp: 210°c
Bed Temperature: 60°c
Support
Support Type: Touching Buildplate
Platform Adhesion Type: Brim