Vacuum storage bag replacement cap and SUP pump adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Use your SUP manual pump as a vacuum pump for vacuum bags
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 72
- Makes
- 0
- Views
- 332
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
In case you've lost a cap, print a new one. The bag valve commonly has a pink rubber insert that acts as a one-way valve, and the cap is used to keep the valve closed. This thread is a 2-start 1.4mm pitch with about 24mm diameter. This valve setup is used on Amazon Basic vacuum bags (https://www.amazon.com/AmazonBasics-Vacuum-Compression-Storage-Bags/dp/B07RSCPH4N/) and several other brands. Also used on some filament storage bags.
The adapter converts from the common stand-up paddleboard pump 1/4 turn bayonet hose connection (see Hulkey-Roberts 690NSBVG fill and deflate boat valve, https://www.halkeyroberts.com/Products/fill-and-deflate-boat-valve). It is a great solution if you're going on a paddle board trip and taking your SUP manual pump. With this adapter and bags you can reduce the size of your pack and keep your stuff dry. Tie a cord through the hole in the side so that you can hook it with a carabiner.
Print the adapter with the threaded end up, with at least 4 wall loops, support under the inside pin, and maybe fuzzy skin for extra grippiness. I printed in PETG. Print some for your friends, and take a spare.
Fusion 360 parameterized models for the thread, adapter and cap are included.
Also see these other SUP pump adapters: https://www.printables.com/model/1252768-sup-pump-adapters
Did you build it? Please leave a comment and rating.
If you really love it you're welcome to throw me a bone. Thank you. :)