1 / 5
Bentobox mount for Qidi X-plus
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bentobox mount for Qidi X-plus
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 111
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Bentobox mount for Qidi X-plus. This is made to fit on the left side of the printer; it friction fits in a gap in the panel and shouldn't require any holes or drilling. There are two holes for heatset M3 inserts, I used 8mm depth ones, but you can use shorter if you like. These will mate to the two sloted holes in the Bentobox fan duct allowing the Bentobox to be be attached to the mount securely.
Printed in some old PETG I had lying around, but ABS/ASA would work well. Do not use PLA if you plan on printing high temp materials in your X-Plus.