1 / 4
Cutterblade (-holder)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cutterblade-holder
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
A simple Cutterblade-holder.
To install a cutterblade you may need a lighter, a screwdriver and a pair of pliers.
- Print the 2 parts and
- heat the part around the hole in the cutterblade with a lighter.
- Lay the cutterblade in the Handle like shown in the last picture (You should use a pair of pliers so you dont burn yourself). The blade should be under the nubs 1 and over the nub 2 (see picture).
- Press down on the blade with a screwdriver so the blade melts into the nob 2.
- Let it cool down and
- press the blade under nob 3.
- Test if the cap fits and press it on the blade so it holds tight.
Dont try to take out the blade after installation! Its difficult and dangerous! I assume no liability for injuries!