Miroir HEXA 130mm 2.9mm
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Support ajustable sur 2 pivot pour miroir hexagonal
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 37
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial
Voici un support pour miroir hexagonal de 130mm de large et de 2.9mm d'épaisseur
le système est conçu de tel manière que le miroir est maintenu en place par 3 clips (pas besoin de colle)
On utilisera 6 insert m3*5mm à mettre au dos du support miroir, cela permet de fixer le pivot
On utilisera donc 6 vis M3*8mm
Pour le pivot il faut 1 écrou M5 et 1 Vis M5*40
Et la fixation murale est conçu pour des vis tête fraisée de diamètre 3,5mm
Ajout d'une pièce intermédiaire permettant un deuxième pivot permettant une orientation du miroir dans n'importe quelle position
------------------------------------------------------------------------------------------
Here is a hexagonal mirror support 130mm wide and 2.9mm thick
the system is designed in such a way that the mirror is held in place by 3 clips (no need for glue)
We will use 6 m3*5mm inserts to put on the back of the mirror support, this allows the pivot to be fixed
We will therefore use 6 M3*8mm screws
For the pivot you need 1 M5 nut and 1 M5*40 screw
And the wall mount is designed for countersunk screws with a diameter of 3.5mm
Addition of an intermediate piece allowing a second pivot allowing the mirror to be oriented in any position