Bambu X1C P1P P1S Direct Disposal Poop Chute, Table Integrated Design
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Poop Chute which ejects the printer waste directly into a 70x65mm hole cut right into the table
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 22
- Makes
- 0
- Views
- 187
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Public Domain
Poop chute for a Bambu Labs printer, designed to jettison the waste right into a hole cut into a table that the 3d printer sits on top of. Small fins on the top ensure that the poop chute is correctly positioned behind the printer. Then, you just have to put a simple plastic shoebox or other kind of tray below the hole inside the furniture you cut into, to catch the printer waste. With a shoebox sized container, you could catch hundreds of fillament changes, without ever worrying about running out of waste storage.
It's been sized to fit a printer which is on ‘anti vibration feet’, which would place the rear opening a little higher, but if you have the original shorter printer feet, that should work fine as well.
You need to make a 70mm wide by 65 mm deep hole using a Oscillating Multi-Tool. There are also spots for 6 x 7mm diameter x 2mm deep magnets to be glued into the model itself.
