Unofficial Prusa XL Enclosure Camera
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€6.58 – €8.05 net (excluding VAT)
For file: TOP_0.4n_0.2mm_PETG,PLA_XLIS_5h48m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.32 excluding VAT (range midpoint).
- Weight reported by the author
- 132 g
- Print time reported by the author
- 5.8 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is the official unofficial prusa XL enclosure camera. It is the bestest builtin looking camera for the XL
- Rating
- 4.5 / 5
- Likes
- 29
- Downloads
- 57
- Makes
- 1
- Views
- 1,486
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Public Domain
Items needed:
1 x Raspberry Pi Zero W
1 x Raspberry Pi Camera module 3 Wide
1 x Raspberry pi Camera Cable (300mm)
1 x Filament of choice
4 x M2 screw (15mm)
4 x M3 screw (10mm)
5 x m4 screw (16mm)
1 x MicroUSB Cable (Length is up to you)
8 x ziptie (2.5 x 160 mm)
Link for software install instructions: https://gist.github.com/cannikin/4954d050b72ff61ef0719c42922464e5
How to put Camera Together:
How to install Camera to enclosure:
Note:
screw length is just is a suggestion, you can get away with longer ones to an extent as the holes a pass-through