1 / 2
Vertical Stand for Elecrow 7" Touchscreen (Display-C)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Could not find any, so I designed my own.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 15
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Could not find any, so I designed my own.
BE CAREFULL NOT TO STRIP THE HOLES (especially the top ones)! Because of the HDMI plug there was little space to play with.
Mounting holes are for M3 bolts (2.6mm diameter) and 157mm apart. There is a little flex in the design.
On the bottom there are holes with 4mm to mount to a table or else.
Left and right part of the stand are marked "L" and "R" on the upright.
One version has 33°, the other has 37°.