Neptune 4 Series Filament Guide Mount w/ Pulley (Supports UBBI)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Movie Camera style filament sensor mount with a easy rotating filament runout sensor using 608 bearing.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 218
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello, here's an upgrade from my V1 version of the filament sensor mount with a 608 bearing.
One can choose how to use this mighty ‘Movie Camera’. For non drybox, the pulleys will lend u a hand. For drybox users, plug your PTFE tubings on top and watch the pulleys cry from abandonment.
Shoutout to SilencedFrost for his overengineered UBBI ecosystem, a UBBI version of this mount is included as well!
Link to his UBBI: https://www.printables.com/model/891137-ubbi-universal-bidirectional-bowden-interconnect-a
This mount consists of 6 printable parts:
- Base x 1
- Pulley arm x 2
- Pulley x 2
- Filament Barricade (PC4-M6 or UBBI version) x 1
- Washers for Pulley bearing x 2
- Cork for filament sensor x 1 (Using SilencedFrost's design of his bearing holder)
Printing recommendations:
- 3 walls, 15% infill for all parts except Filament Barricade.
- 4 walls, 30% infill or hight for Filament Barricade (PC4 and UBBI versions)
Most of the parts do not require supports as some already have supports built into the model.
The Base requires support as shown in the guide pdf, along with MUST FOLLOW orientatoins for some parts.
Installation requires:
- 2 x M4 screws from the original spool holder to mount onto the printer
- The original screw that holds the filament sensor, forgot the dimensions, just use it.
- 2 x M3x10 screws with optional metal washers (3D printed washers already included) to secure Pulleys
- 3 x 608 Bearings
Before printing:
- Make sure your orca tolerance test is done, with the hex piece able to fit in the .05 tolerance hole with at most slight force. Must be able to take it out easily after fitting in.
- or any other equivalent tolerance test.
Future updates will include a center pulley for filament source coming from behind the printer. And a potential swivel pulley for guiding filament from the sides of the printer.
