A Better Numenera / Cypher System Stat Tracker

I wasn't happy with my previous tracker for Cypher games and made a new one, this time using round magnets (optional but recommended).

The idea is the following:

• Insert as many magnets into the board as you have points in the stat.
• Use the markers for tracking the current value.
• If one of the values reach 0, move the marker to the damage track (alternatively, put it someplace safe and move the damage marker to the left).
• Insert the small pegs into the hole on the right hand side to keep track of Edge. They should just fit and stay in place if your printer is well calibrated.

Printing and assembly:

• Use 5x3mm round magnets.
• No glue necessary, all magnets should fit snugly if your printer is well calibrated. Most magnet holes have a 2mm opening in the back to make it easier to remove them if necessary.
• OPTIONAL: Skip the magnets and use the tokens with pegs. This will require the model to lay flat, though, and generally be a lot less stable.
• I recommend printing the tokens in a different color than the tablet, and also printing the letters in a different color (can be done on any printer even without color change system).
• I printed with PLA at 0.2mm layer height, but other materials and settings should work fine.
• The STL for the tablet has a blank space at the top where the character name is supposed to go. You can print it as is and use a marker. I've also provided the source file for Fusion 360 so you can insert a name or phrase of your choosing.
• You can also use the Fusion file to modify the model for differently sized magnets.
• Note that the Fusion file needs the free Alpha Centauri font available here installed. Using a different font will mess up the layout.

Happy gaming!

Update 250306:

• I forgot to upload the Fusion file. Fixed.
• I was made aware that Edge can go up to 6, so I added a version with 6 Edge slots.