Bayonet mount Bajonettverschluss
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bayonet mount in which the spring is replaced by oppositely polarized magnets.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 41
- Makes
- 0
- Views
- 312
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Costume Accessories
- License
- Creative Commons — Attribution — Noncommercial
A bayonet mount with an external diameter of 43mm.
To properly attach the closure, both parts have an arrow for alignment. I originally designed it to secure a stuffed animal to a coat (for carnival). The base plate was sewn onto the coat and the stuffed animal was glued onto the lid with hot glue.
Due to the slight offset of the magnets, a nice pressure point is created and the lid automatically 'slides' into the locking position after surpassing this point. This provides a very satisfying feeling
Parts:
8pcs 10mmx3mm Magnets
Assembly:
You simply need to press the magnets in place. It's important to ensure that the magnets in the base and those in the lid repel each other, as they are intended to replace the otherwise required spring.