1 / 4
Toggle Clamp for CNC Workpiece holding
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This Toggle clamp needs 3M Bolts to hold it together and a M6 Bolt to slide into the slots.
- Rating
- 4.5 / 5
- Likes
- 148
- Downloads
- 508
- Makes
- 2
- Views
- 2,907
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
Additional Hardware:
4 x M3 Bolt, 30mm
4 x M3 Nut
1 x M6 Bolt (Hex head), 30mm
1 x M6 Nut
1 x M6 Bolt (round head), 20-30mm
IMPORTANT: The Hex head bolt needs to turn freely in the "Base" part, but needs to be fixed permanently to the “wheel”. This can be done with super glue. The M6 nut sits in the slot of the CNC and by turning the wheel, the clamp will be firmly fixed to the table.
Use plenty of lines when slicing (ca. 10) and 40 to 80% infill).