The Lit Benchy! | Table Lamp

This is a special Lit Benchy version of my original lithophane table lamp, The Lit Benchy that rocks!

Attribution
The image for the lithophane I got from the “Stranded Benchy || Benchy Holder” created by 
https://www.printables.com/model/927073-stranded-benchy-benchy-holder

https://www.printables.com/@Nando_1827691

As I did not remix the model itself I have not made this a remix but rather an attribution as I still have used the image that was created by Nando, thank you Nando!




I designed this small cylinder shaped table lamp for lithophanes, but it can most definitely be used without. I uploaded the lamp shade without lithophane imprints on it so print that if you do not want to have an image on the shade, you can just print that one instead of designing one.

Fits an E14 bulb fitting with a 10mm attachment screw like this one:
https://www.harald-nyborg.dk/mignonfatning-e14-hvid

Fits an E14 bulb like these ones:

https://www.harald-nyborg.dk/philips-led-paere-21-w-e14-t25l

https://www.harald-nyborg.dk/philips-led-paere-25w-e14-t25s

Measurements for making a custom shade:
ID = 64,4mm

OD = 68mm

Shade channel Depth = 3mm

For lithophane shades, use these settings to print one that fits snugly into the shade foot:

Made using
https://tool.itslitho.com/CreateModel

Shape options

Shape = cylinder

Height = 150mm

Diameter = 63,7mm

Min. thickness = 0,8mm

Max. thickness = 3,2mm

Frame options

Frame = frame

Thickness = 3mm

Depth = 1,5mm

Angle = 0 deg.

Print instructions

Shade holder:

Print the shade holder with the legs pointing upwards

No supports

0,1mm layers for best look

70% infill, primarily for weight so the cord does not pull the lamp off the table.

Shade:

You can find the guide here from itslitho: https://itslitho.com/itslitho-blog/slicer-settings-for-lithophanes-tweaking-to-perfection/

I used 4 perimeters and 0% infill, and printed on 0,1mm layers for best image detail.