1 / 6
ZOTAC GTX 1060 Mini 6GB - Dual 92mm Fan Adapter (Remix) — image 1
1 / 6

ZOTAC GTX 1060 Mini 6GB - Dual 92mm Fan Adapter (Remix)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A remix of the original model by @DH_21177

Rating
0 / 5
Likes
3
Downloads
40
Makes
0
Views
503
Reviews
0

Updated at source:

Model information

Category
Computers
License
Creative Commons — Public Domain

I made a few modifications to the original design to better suit my needs. I removed the rim around the shroud from the original model since it kept hitting other components on my motherboard when trying to install it but I didn't have issues once I removed the rim from the model. Instead of Noctua fans, I used ID-COOLING TF-9215 PWM fans, which are cheaper.

Mounting & Screws

Screws: 

  • Fan Screws: To mount the fans to the shroud I just used whatever screws came with the ID-COOLING fans and I screwed directly into the ABS plastic (didn't use threaded inserts for these holes)
  • Heatsink Screws: To mount the shroud (with the fans attached) onto the metal heatsink I first heat-set M2 x L3 x OD3.2  threaded inserts into the shroud holes first and screwed the shroud in place using M2 x 6mm screws (the original heatsink screws that are pre-installed with the GPU are too short so you'll need to purchase some M2 x 6mm screws, I couldn't find any specs on the thread pitch of the original screws but the ones I screwed in seemed to screw in okay and the final mounting to the heatsink felt pretty solid so it should be fine)

The original (non-remixed) model didn’t use threaded inserts for the heatsink screws, so it should still work without inserts (but I haven’t tested it). The heatsink hole diameter for the original and my remixed model are the same at 3mm. 

Compatibility

Tested on the ZOTAC GTX 1060 Mini 6GB only.

Should work fine for the 3GB model too but I haven't personally tested it.

Printing & Assembly

Printed in ABS filament.

I used a Pinecil V2 Soldering Iron at 170°C to heat-set inserts into the shroud’s heatsink holes
 

Tags