Infiniti G37 6MT Center Console Lid Latch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is the pivoting latch part of the center console lid for a G37S sedan with a manual transmission.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 36
- Makes
- 0
- Views
- 225
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
This is the pivoting latch part of the center console lid for a G37S sedan with a manual transmission. The hook portion of my latch broke. It may also be the same for an automatic, but I don't know.
Part Removal
To remove the latch, use a Philips screwdriver and remove the black plastic panel under the console lid. Then remove the two screws that secure the latch mechanism to the lid. To remove the push button, gently press in on the 4 tabs that hold it in place one at a time, and it should slide out. Then, to remove the latch, I used a small flat screwdriver and gently pried in on each side of the pivot to disengage the round post.
Printing
I printed it on its side as shown in the photos so that the layer lines would be strong against the direction the original broke. This will make a lot of supports, so make sure your supports are tuned well in your slicer; otherwise, it could need a lot of post-processing. I printed it with a brim, supports, and 100% infill.
I printed it in PLA to test the model. I printed the final product in PAHT-CF because that is what I had on the shelf. It would probably work in PETG, ASA, or any other engineering-grade filament. The original part was polycarbonate/ABS.
The photos and video show the PLA test piece.
Short video of assembling the latch: