Rod Wrapping Slip Clutch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slip clutch allows rod rotation to stop to apply finish epoxy around line guides, hook keepers, and tip top.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 10
- Makes
- 0
- Views
- 127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This slip clutch uses magnetic coupling to maintain motor rotation. Hold the rod with your hand to break the coupling and slip the clutch to stop rotation so you can apply finish epoxy around critical fishing rod components.
Additional Parts Needed:
1 ea. 2 inch ¼ x 24 tpi bolt Trim to reduce overall length.
1 ea. ¼ x 24 tpi nylon nut
8 ea. 6x3 mm magnets
1 ea. silicone cup cover for holding the rod in the clutch. https://www.amazon.com/dp/B08KB5GV3C?ref=ppx_yo2ov_dt_b_fed_asin_title
I used PLA for this model with no brim or supports. I used a ¼ x 24 tip tap on the the plastic coupler so the bolt would thread into the plastic coupler securely.