Axion - Picatinny Rail Stock
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A lightweight stock for any 3 slot picatinny rail stock mounting point.
- Rating
- 5 / 5
- Likes
- 67
- Downloads
- 343
- Makes
- 1
- Views
- 1,464
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
Inspired by the Crush stock, and the RC Venom Pro Stock Kit, this is a skelotonized lightweight stock. It was designed with the Dart Zone Venom Pro ergonomics in mind, but will work for any other blaster with a pic rail mounted stock.
Hardware needed:
-2 x #4-40 screws
-2 x M3x25 socket head bolts
-2 x M3 nuts
Assembly:
-Use 2 x #4-40 screws to secure the Rail Mount to the Stock Body
-Slide stock onto pic rail and install 2 x M3x25 bolts and 2 x M3 nuts to secure the stock.
Printing:
-25% Cubic/Gyroid
-5 Walls
-StockBody needs a brim to prevent warping
It's a bit of a squeeze fitting the stock onto an Ender 3 bed, so you'll have to turn off the skirt or the skirt will exceed the print volume.
