Monkey Face Button
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.12 – €0.15 net (excluding VAT)
For file: monkey_button_0.15mm_PLA_MINI_10m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.14 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 10.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Monkeys face button. +- 20 mm diameter with two button holes.
- Rating
- 5 / 5
- Likes
- 13
- Downloads
- 103
- Makes
- 3
- Views
- 373
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Monkey Button
Decorative sew-on button.
The button is approximately 20 mm in diameter.
The button has a recess for the thread to stay hidden/flush to the surface.
Print Instructions
Print with 100% infill is recommended.
Upscaling is possible.
Downscaling is not recommended as the holes might be too small (1.5 mm at 100%).
Print in higher resolution as is 0.15mm layer height or better.