Yet another Gonggi inspired by The Squid Game
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gonggi set with two boxes
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 34
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
My daughter asked me for the gonggi from the TV series, I just finished drawing it. It's not an original idea at all, but I wanted to create a practical package with a snap fit closure or a slide lid - and snap fit lock. In the end I made both boxes, quite light (with 10% infill the slicer requires the use of 25/30 gr of filament each). The only supports needed are those for the stones. I designed the slots with a clearance between 0.10 and 0.15mm, so it is necessary to calibrate the machine and the filaments, and probably it would be useful to draw the seams in the slicer.
EDIT 2025.03.10:
I've firstly designed the stones measuring Ø20mm*H. 20mm, maybe too big for playing.
I've added another set of stones measuring Ø16mm*H.16mm and their respective boxes, I think that smaller are more suitable for even small hands.
If you like the designs place a like and/or a make :)