Turning handle with rotating swivel knob for 9mm D shaft
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turning handle that fits on 9mm D shaft. Free turning swivel knob to facilitate turning of the handle.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 43
- Makes
- 0
- Views
- 186
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution
I created this Model to replace the missing handle to set the thickness on a TT204 jointer/planer/thicknesser.
The handle fits snug but is still easy removable on the 9 mm D shaft (7.9 mm from the flat of the D to opposite round edge of the shaft). See photo of the shaft where the handle is placed on.
The knob rotates freely on the end of the handle to facilitate turning the handle and is kept in place by a DIN7991 Hex socket countersunk screw M6x20mm.
The M6 thread is modelled in the handle and the screw went in snug without retapping the thread.
All was modelled in F360, .step file provided in case you want to customise.
Printed on Sovol SV06, with Anycubic PETG.
Worked out well and is plenty strong to turn the shaft and set the height on the thicknesser.