DIY Molekule Air Purifier
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made a DIY air purifier using the used filter from my Molekule Air Mini
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 16
- Makes
- 0
- Views
- 328
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
I noticed that when the filter from my Molekule Air Mini said it needed replacement that it was still quite clean, however, I already ordered a replacement so i replaced it, but, instead of throwing out the “spent” one I made a fan adapter and plug for it. I designed a simple plug for the bottom of the filter and a 120mm fan adapter for the top. I then attached the fan to the adapter and glued it all up.
Note: I found that a slight elephants foot on the plug really made it sit perfectly making gluing it in place really easy and it sits really flush. Thank you bad bed leveling :)
Plans:
- Add an arduino controlled power supply
- Design and print an overall case
- replace screws attaching the fan to the adapter with shorter ones
Materials:
- 120mm Fan -
- Im using this model for power simplicity and speed control: https://www.amazon.com/gp/product/B0BG4C9H5P/ref=sw_img_1?smid=A2ZLBPY6Z7FDMB&th=1
- Air Filter-
- Any one from amazon will do like these: https://www.amazon.com/dp/B0CKYTX8WX?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1