Removable Cart Coin Labeled

Removable cart coins for shopping carts in Canada (Quarter Dollar, and One Dollar)

This is a remix that adds coloured labels, intended for the “Single Extruder Multiple Material” setting in PrusaSlicer

HOW TO use this setting in PrusaSlicer:

1. Navigate to the Printers tab and under Capabilities, enter 2 entruders, then check the “Single Extruder Multiple Material” option.
2. Under Printers tab, select Custom G-Code from the right menu and in the Tool Change G-Code, you will want to add {if layer_num >=0}M600{endif} *this bit of code will essentially tell your printer to wait until it has started the first layer of the print before promting you to swap filaments/colours.
3.  Under Print Settings tab, select Multiple Extruders from the right menu. Under Wipe tower, uncheck “Enable” - We DO NOT want a wipe tower, this is a waste when swapping filament yourself.
4. Select Advanced on the right menu. Under slicing, change Elephant Foot Compensation to 0.
5. Under Plater tab, select the label parts, and assign them to one extruder, and the cart coin body to a different extruder.

*TIPS: I suggest printing with the label face down on the print bed. I find this gives a cleaner end print, and results in fewest tool changes.