Extruder Visualizer - Witcher Themed
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.43 – €0.53 net (excluding VAT)
For file: Witcher Extruder Visualiser_0.07mm_PLA_MK3S_40m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.48 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 40.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Simple Extruder Visualizer
- Rating
- 5 / 5
- Likes
- 24
- Downloads
- 70
- Makes
- 1
- Views
- 505
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Got a bit bored by my old extruder visualizer and as i still had some magnets i made a quick and simple visualizer with the Witcher theme in mind.
It's an easy print at 0.1mm and glue a 7mm (or smaller) magnet on whatever side you like best (depending on the direction you want the head to move) If you are using a Textured or Satin sheet and you print with PLA i recommend adding a brim to be on the safe side.