Pushup / Handstand Bar Foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple foot for pushup or handstand bars for use with wooden rods
- Rating
- 5 / 5
- Likes
- 22
- Downloads
- 60
- Makes
- 1
- Views
- 433
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
A simple foot for pushup or handstand bars. Use 30 mm diameter wooden rod for the model file found here or modify the onshape model for custom sizes.
BOM:
30 mm diameter wooden rod
4x Confirmat screws 4x37 mm, they look like this:
I strongly advise to use a drill press to drill the holes into the wooden rod, because it's vital that they are straight and exactly on one straight line, otherwise the bars will wobble around.
I printed mine upright, to avoid layer splitting by the tapered screw.
Print with 4 or more perimeters (0.4 mm Nozzle) and 20% infill.