1 / 4
Sailing 3D Benchy Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stylish stand for your favourite 3D Benchy!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
Why should you print this?
For your best/favourite/fastest 3D Benchy, you need an appropriate display!
Filament
Material: Any, but I recommend PLA;
Colour: Also any, but I recommend: Nozzle–Metal, Sea–Blue;
Print Settings
Nozzle: 0.1 mm, 3 perimeters, 15% infill, with supports
Sea: 0.25 mm, 2 perimeters, 15% infill, no supports
Post processing
Glue the nozzle part to the sea using the small pin in front of the model. If hole in the nozzle is too small for the pin, you can make it bigger by heating a cork board pin and piercing the hole.