HO snap roadbed - 24" radius 45°
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
24" radius 45° snap-together roadbed section for set and flex HO track
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 56
- Makes
- 0
- Views
- 253
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
You will need 8x pieces to complete a 24" radius circle. 2x Atlas 24" radius 22.5° sections will fit, or flex track. You will have to affix with small screws or glue.
-You'll need a 420x420 bed to print.
-This has been tested with both Atlas set and flex track, please confirm tie lengths from other manufacturers match Atlas ties to ensure fitment
-This is NOT compatible with other commercially available snap-together track like Bachmann EZ, Atlas TruTrack or Kato Unitrack.
-print flat
-supports only inside connector cavities
-if it comes off the bed warped, pour scalding hot water over it and lay it on a flat surface. Place flat, weighted object on it and let cool.
-FOLLOW for new uploads.