HO snap roadbed - plank adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This adapter will allow you to use 1/4" wood plank or MDF strip as sectional roadbed with the snap roadbed system.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 35
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This adapter will allow you to use 1/4" wood plank or MDF strip as sectional roadbed with the snap roadbed system.
I've included 3 sizes plus a universal adapter.
- ¼" x 1.5"
- ¼" x 2"
- ¼" x 2.5"
- ¼" x any width
The universal adapter has a spine down the center to reinforce adhesion. You'll have to cut a groove into what you're mounting it to.
- cut a 4mm x 33mm groove down center of wood/mdf strip at the ends. Drilling a hole can help.
Glue- use epoxy on all mating surfaces. Be sure to sand or clean surfaces with IPA before applying glue.
-This has been tested with both Atlas set and flex track, please confirm tie lengths from other manufacturers match Atlas ties to ensure fitment
-This is NOT compatible with other commercially available snap-together track like Bachmann EZ, Atlas TruTrack or Kato Unitrack.
-print flat
-supports only inside connector cavities and under glue tabs
-FOLLOW for new uploads.