1 / 4
HUANUO Single Arm Monitor Stand
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple 3D design that converts the HUANO Dual Monitor Stand into two separate single monitor arms.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 21
- Makes
- 0
- Views
- 260
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Required:
3x - M6x45 Cylinder Head (legnth depending on your desk plate thickness)
3x - M6 Wing screw or M6 Nuts
6mm Drill
optional:
3x - M6 Washer
!!!Print the adapter sideways or in a 45° angle for better stability!!!
Filament | Elegoo PLA Plus |
|---|---|
Infill | 30% Honeycomb |
Wall Layers | 3 |
Layerheight | 0.2mm |
Supports | Yes |
For my desk with a thickness of 25mm I used M6x45mm cylinderhead-screws, and 3D printed the washers.
Ive printed the washers with 100% infill.