Rover Halow Antenna Washer For 2024 Yarbo Core
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Because I lost mine, then found it, then figured someone else might just do the former.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 17
- Makes
- 1
- Views
- 116
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Standard Digital File License
🟩 🟦 🟦 🟪 🟥 🟧 🟨
This is a replacement washer/grommet for the halow antenna on the 2024 Yarbo Core rover. I don't know if it fits the earlier model(s) - maybe let me know in the comments!
It is probably best to print this in the softest TPU you have and make this fully solid, as this needs to flex a bit to make a good seal, and also needs to block humidity and water. 95A or thereabouts is probably too hard.
Before you remove your antenna to fit this please turn your rover fully off, as sometimes removing antennas from radio systems can break them unless it is known to be safe.
If this does not fully connect due to using a harder TPU, you may need to scale the model down slightly and only on the Z axis.
If you like my designs or find them useful it would be great if you can support me by joining my club on Printables for at least a month, which gives you access to various extra models for the duration of membership. Another alternative is to buy me a coffee over at ko-fi via this link. Thank you!
🟩 🟦 🟦 🟪 🟥 🟧 🟨