SysRacks Door Hinge Bushing
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.10 – €0.13 net (excluding VAT)
For file: sysracks door bushing_0.4n_0.15mm_PETG_MK4S_8m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.12 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 8.4 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A quick bushing set to take up the door slop and sag on the SysRacks Server Rack.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 39
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
I inherited a SysRacks server/equipment rack. The hing of the front door is just to pins in a sheet metal hole, and it's terribly sloppy. Door isn't straight and drags the bottom, rattles, etc. So I made this quickly to take up that slack. Hope maybe they'll be of use to someone else.
I printed in PETG, but a firm TPU could be a good choice too. I'm uploading the STEP files as well in case you need to make some modifications. My doors had lots of wear so these might not fit a new rack perfectly.