Prusa XL Buddy3DCam Sidemount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€5.05 – €6.18 net (excluding VAT)
For file: BuddyCam Mount_0.4n_0.2mm_PLA_XLIS_4h15m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.62 excluding VAT (range midpoint).
- Weight reported by the author
- 99 g
- Print time reported by the author
- 4.24 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This Buddycam mount can just be clicked over the left or right top extrusion endings and has 4 screwholes for mounting.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 36
- Makes
- 0
- Views
- 284
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
This Buddycam mount can just be clicked over the left or right top extrusion endings and has 4 screwholes for mounting the twist locking disk onto it.
Apparently also compatible with Google Nest 2nd Gen indoor camera's, they have the same hole layout as the buddycam.
It has a rotation function with some stops at some angles, so you can pivot it how you like.
Rotation is rather stiff at the moment, but gives it some rigidity.
(printed in place hinge)
Because I didn't want any sharp corners or strange corners and angles, there is a lot of free space in the outside corner, so just put 3 hexholes in there, where you can place a screwdriver or some allenkeys that came with the prusa XL.
Initial design was with the mount already printed but left it off for the latest version because the orientation of printing was difficult. So unfortunately this is not a toolless design, but hopefully will be someday :)
(Probably will update a newer version in the future)
On the photo printed in prusa PETG orange and the side with the screwholes down gives I think the best result, but of course your results may vary.
Welcome to feedback, leave some and I will definitely review :)
Gcode for PLA & PETG available for prusa XL.
15/03/2025:
Adjusted the holes a little and also swivled the whole thing out so everything can be supported for a cleaner print.