Amiga 1000 rear panel for RGB2HDMI HDMI output
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Don't cut your rear panel!
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 32
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I fitted a RGB2HDMI adapter in my Amiga 1000 with this print.
quadrupedal has made some beautiful A1000 models and the Amiga 1000 Rear Panel was the starting point for this model. I made it more printable by switching the text from extruded to recessed, and split it so that it would print on my MK4S - one half has an overlap so that you can join them with a dab of glue of you like. I added an HDMI output that should fit most short mini HDMI plug <-> HDMI socket adapters. I also added a place for three buttons to control the RGB2HDMI via its menus.
The two “back” parts hold the switches and the HDMI cable to the rear panel. The panel has holes for heat-set M3 inserts. If your cable is different to mine, modify that back part a little - some of them can have weird curves so cable ties or a little hot glue might be easier than trying to model them exactly.