1 / 21
Raspberry Pi Zero 2 W/WH with Pi Cam Module v2/v3
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a housing for a Raspberry Pi Zero 2 W/WH and camera module v2 or v3.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 263
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a housing for a Raspberry Pi Zero 2 W/WH and camera module v2 or v3.
The 3D manufacturing format files (*.3mf) were also created with PrusaSlicer for printers of the Anycubic Kobra 2 Plus series.
I used PLA filament, but it shouldn't be a problem to print the model with PETG or ABS filament.
Attention!
The model is not intended for unprotected outdoor use or damp environments.
Photographs of the model will be submitted later.
Fittings
- 1x Mineral glass 40mm x 40mm x 1mm
- 3x Countersunk screws M2 x 6mm - On the housing on the left, right and top.
- 2x Countersunk screws M2 x 10mm - Left and right of the slewing ring base.
- 4x Round-head screws M2 x 6mm - For the Raspberry Pi board on the sledge.
- 1x Round-head screw M4 x 16mm and 1x M4 screw nut - For the horizontal slewing ring axle.
- 1x Round-head screw M4 x 12mm, 1x M4 screw 1x and 1x M4 washer - For the vertical axis of the mounting plate.
Material
- Filament: PLA
- Layer: 0,2mm
- Infill: Various
- Infill pattern: Various
- Supports: Partially
Quantity
- Board Sledge: Quantity: ~30,90gr, ~10,30m, Infill: 20%
- Ceiling Mounting: Quantity: ~122,07gr, ~7,40m, Infill: 40%
- Cover: Quantity: ~83,09gr, ~27,86m, Infill: 25%
- Slewing Ring: Quantity: ~6,32gr, ~2,12m, Infill: 40%
- Wall Mounting: Quantity: ~45,44gr, ~15,23m, Infill: 50%
- Wall Mounting Nut Cap: Quantity: ~0,49gr, ~0,16m, Infill: 100%
- Window Frame: Quantity: ~1,36gr, ~0,46m, Infill 100%
CangeLog
- 2025-03-12: Added Photographs.