1 / 5
Raspberry Pi Pico W Protective Travel Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple, print-in-place case to protect a Raspberry Pi Pico W and the header pins. Prints in about an hour.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 38
- Makes
- 0
- Views
- 311
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Raspberry Pi Pico W Protective Travel Case V2
This is a simple case that I modeled to protect my pico w board and the header pins whenever I need to take it with me somewhere. It secures the pico w board well to the point where it won't fall out even if the case is open and it is turned over.
The slots for the header pins are designed for 10mm pins measured from the bottom of the pico w board.
Print Time: ~1hr (with 0.6 nozzle)
Printing Recommendations:
- Material: PETG (I used Prusament)
- Infill: 15%
- Layer Thickness: 0.3 mm for a 0.6 nozzle
- 0.15 mm would probably be optimal for a 0.4 nozzle (untested)
- Fuzzy Skin (optional):
- Fuzzy Skin Thickness: 0.2
- Fuzzy Skin Point Distance: 0.2
- To ensure you don't apply fuzzy skin to the compliant hinge, select “Paint on Fuzzy Skin” in PrusaSlicer, then select “Smart Fill” and select all the outer faces of the box and top like below
