1 / 7
Trimmer Wrench for RCA AR-88 Vintage Radio Set — image 1
1 / 7

Trimmer Wrench for RCA AR-88 Vintage Radio Set

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

An attempt at making a printed wrench for the trimmers of this antique radio set

Rating
0 / 5
Likes
0
Downloads
6
Makes
0
Views
37
Reviews
0

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — Share Alike

I have a friend who enjoys restoring and using vintage radio equipment (and cars!). He's wanted one of these rather famous radio sets for many years and finally found one locally - they're incredibly heavy and unfeasible to post. 

To check the tuning and make any necessary adjustments, he challenged me to make a wrench to loosen and tighten the really awkward nuts on the trimmers. The “normal” wrench needs to have a hollow handle to pass the long trimmer stem, and apparently these are incredibly difficult to source.

Unfortunately the available flats for a wrench to get purchase on, are ridiculously small. I've arrowed some of them in the pictures. Another consideration is that some of the trimmers are very near other components so the handle has to be long but slim to clear them. 

I printed out several tips and one handle, so he could try out the fractionally different sizes before pushing the zero-clearance handle fully home into the desired tip. 

He established the best-fit tip, but although it was a very good fit, it still didn't quite get enough grip on the nut. So on my advice, he warmed the business end in hot water for a minute and then pushed it hard onto a nut. Once cooled fully, it works a treat :o)

If your trimmer nuts are very tight, you may have to try to get a spanner or other wrench in to start loosening the nut, but after that, the tool can be used to tighten and loosen easily in future. They don't need to be done up very tight, just enough to lock the trimmer stem from moving again after you've got it in exactly the right position. 

I found that my printer (at these dimensions) printed a designed 7.5mm at 7.4mm, i.e. 0.1mm undersize. The final successful tip was printed at 7.65mm and ended up measuring 7.55mm. Obviously there is the possibility you may need different sizes for your printer, I can supply those on request. If yours prints even more undersize then you can probably deal with that by heating it up for a bit longer before pushing it home on a nut, but if it's too loose to start with then you'll need a smaller STL. Just ask.

I hope this comes in useful for someone else! Please post any makes and let me know how you got on with it.

I used PLA+ with 0.4mm nozzle, 0.2mm layers, 4 walls, 35% triangle infill, no support, and a 3-line brim to ensure adhesion especially on the tall handle. Use a stronger material if you have it, I only have PLA+ to play with!

Please Like this model if you find it useful.

If you REALLY like it, https://www.buymeacoffee.com/gigabeast :o)