Justice League opening intro scene
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Growing up one of my favourite cartoons was the Justice League. This is my recreation of the intro.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 45
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x112.5mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA Kingroon White Transmission Distance: 5.8
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Red
At layer #12 (1.04mm) swap to Orange
At layer #15 (1.28mm) swap to Pure Yellow
At layer #21 (1.76mm) swap to White for the rest.