Pour-over coffee kettle riser
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€8.35 – €10.21 net (excluding VAT)
For file: stagg stand_0.4n_0.25mm_PETG_MK4S_7h28m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.28 excluding VAT (range midpoint).
- Weight reported by the author
- 165 g
- Print time reported by the author
- 7.47 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A stand for your Stagg pour-over coffee kettle from Fellow. Room to stash your coffee bags underneath.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 15
- Makes
- 0
- Views
- 322
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
This stand holds your Stagg heater plate securely, with cutouts to make it a perfect fit. The model handles the weight by using two ¼ inch wooden dowels (inserted from below) to hold the shelf and keep it from sagging. To complete the print, rubber feet are also included in the model - they just press into the bottom of the stand after they are printed.
Printing instructions
No supports are required for this at all. Choose an attractive color, and print it at your finest quality so you get a nice addition to your kitchen counter. For the stand, I recommend PETG or ABS, though PLA is tough enough but may sag, and cannot be put in your dish washer.
The dowel holes come out exactly at ¼ inch and nice and round. But if your dowels are slightly oversized, do not force them. Instead I recommend printing the model at 101% in the slicer - things come out a lot nicer then.
For the feet, I recommend Ninjatek Ninjaflex in Midnight (black) - you will need 4 feet, the model only comes with the foot shape, so you have to add three more instances in your slicer. When Slicing the stand, remove the feet. When slicing the feet, remove the stand, add the additional 3 instances, and if you are using Prusa Slicer 3.91, use the sequential printing option to get the best quality on the feet.