Bookmarks v2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A reworked version of my bookmarks
- Rating
- 5 / 5
- Likes
- 84
- Downloads
- 303
- Makes
- 1
- Views
- 828
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A reworked version of my bookmarks with additional motives. Their thin character does not damage the book or its binding or bend the pages, like other, thicker bookmarks would. Some motives like the triskelion make beatiful shadow images when exposed to decentral lighting.
For optimal results, the bookmarks need to be printed with a 0.2mm nozzle, the slicer has to use the arachne wall generator engine. Most booksmarks are also possible with a 0.4mm nozzle, but the patterns are significantly weaker. The tree will not work with 0.4mm nozzles or bigger. After the print let your build plate and the print cool down completely, before removing the prints from your build plate! Also be careful while removing.