1 / 1
Eufy SoloCam S340 Drilling template for mount + scad file
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Drilling template for Eufy SoloCam S340
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 57
- Makes
- 0
- Views
- 239
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
Needed a drilling template to make drilling the holes for the camera mount in an awkward place easier.
This is my first attempt at making a model so I used Claude 3.7 sonnet to make the scad code and then used that to be able to modify the parameters to make it close to perfect. It is good enough for when using the plugs because there is room to wiggle but the scad file is there if you need to make adjustments or use it as a template for other similar mounts.
The only print setting I changed was the infill to 15% and added a brim to make sure it was perfectly flat.