Luigi's Mansion Hueforge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
170mm X 162mm Luigi's Mansion Hueforge.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 18
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170x161.92mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.8mm
Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.3
PLA+ Sunlu Green Transmission Distance: 10
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Green
At layer #14 (1.2mm) swap to Pure Yellow
At layer #17 (1.44mm) swap to White for the rest.