1 / 3
6.5 inch rack ZimaBlade
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
rack mount design by use 3D Model Resources for IceWhale Products as reference and i dont have device to test this print, use at your own risk
Rack mount
- use M3 screw (4-5mm) and backplate to lock ZimaBlade in place if not fit
2.5 inch hard disk or SSD
- can mount 2 by place on top and require screw on bottom
- not sure about temp if too hot just place one
My print settings
- layer height: 0.2
- wall: 3
- infill: 15%
If you enjoy my work, please consider support at link in profile.
Change Log
- 2025/10/21
- Add V2 Model
- make it working with RackMate TT by reduce width from 133 to 130
- Add V2 Model