NATO/STANAG 40mm thread to twinn DAR adaptor v1.0
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Twin DAR filter adaptor for 40mm NATO/STANAG thread. Used for example in…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 21
- Makes
- 0
- Views
- 141
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
Twin DAR filter adaptor for 40mm NATO/STANAG thread. Used for example in PANORAMASQUE. https://www.honeywellsafety.com/Products/Respiratory_Protection/PANORAMASQUE.aspx?site=/europe
To be used with two standard DAR filters.
For single DAR filter vesion look here: https://www.thingiverse.com/thing:4285159
This design solves common problem with many others design of twin filter adaptors - random position of filters when adaptor is screwed-in. At beginning of the thread there is a place/slot to press-in standard soft O-Ring of size 30x3mm (30mm is internal diameter of O-Ring). Elasticity of the O-Ring gives a neccesary space to turn adaptor into proper position. See pictures attached. Adaptor slot cross-section is little more than half of circle - so O-Ring is locked in place nicelly.
The filter cones are design according to ISO 5356-1:2015 standard, with FDM 3D printing technology in mind.
This version need no support.
There are many misunderstandings regarding the NATO/STANAG thread vs standard RD40mm. Good explantions you can find here: https://gasmaskandrespirator.fandom.com/wiki/Thread:11144 and here https://youtu.be/lXPNuyp4ek4
Print parameters:
- Material - PET-G
- Nozzle max 0.4mm
- Layer max 0.2mm
- Perimeters - 5
- Top/bottom layers - 5
- Infill density - 40%
- Infill pattern - Concentric or Grid
- Seam position - Random
- Solid Infill Threshold Area - 70mm2
For best result with O-Ring slot it's recommended to use thinner layer for first 2mm. The 0.1mm is perfect. For detail ask in comments.
Files in project:
***NATO_STANAG_40mm-2xDAR_adaptor_v1.0.stl** - adaptor - in ready to print position
Project is continuously improved in close cooperation with: Warsaw University of Technology Faculty of Automotive and Construction Machinery Engineering.
Print and use at your own responsibility.
Category: Other