1 / 7
SK-Go2 - LGX+Mosquito - carriage
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extruder SK-GO2 carriage for Bontech LGX extruder with Mosquito hotend. This is remix of Ernest Lin's design…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 36
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Extruder SK-GO2 carriage for Bontech LGX extruder with Mosquito hotend.
This is remix of Ernest Lin's design https://github.com/SecKit/SK-Go_SK-Mini/tree/master/extruder%20carriage%20STEP%20file
There are few changes to original:
- motor of LGX is thicker - 25mm
- there is hole in the front plate to provide airflow for Mosquito fan
- fan could be installed on "backside" - this is my personal preference to have easy access to nozzle and have a direct look to a nice Mosquito hotend ;-)
- there are bigger holes on back plate to allow use of LGX back Studs as mounting place for cooling fan duct on behind.
- back plate has "ears" on bottom to mount cooling fun duct similar to EVA extruders.
- in my version I have the bottom part welded with backplate
There are step file, Fusion360 file and dxf files for laser/water cut.
Print Settings
Printer:
Laser/water cut
Rafts:
No
No
Resolution:
200
38
Filament: Aluminium -
Category: 3D Printer Accessories