Volumetric Flow Model for orca_to_belt Tool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Volumetric flow model for orca_to_belt to use Orca to print on belt printers.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an object for use with the orcsa_to_belt script to convert 3D slicing to belt printing in Orca Slicer to help find max volumetric flow.
INFORMATION ON orca_to_belt CAN BE FOUND HERE:
https://github.com/xboxhacker/Tilted-Bed-Conveyor
In your C:\Program Files\OrcaSlicer\resources\calib\volumetric_speed folder, back up the original SpeedTestStructure.step file. Drop the file from this Printable into the folder.
Run a volumetric test in Orca. It will now drop the now object into the slicer.
Make sure to turn OFF the brim under Process>Objects>Other
You may need to drop the model down into the bed by about 0.1mm if the slicer is giving you an error about empty layer.
Here is a good start settings for the flow test:
You want most of the flow changes AFTER the V at the bottom.
The model has 5mm graduation on one side. The point on the V is about 28.5mm to the first graduation. This will help with the math to find the max flow rate.
The STL here is just an example