1 / 3
Dragon Burner v8 Cowl - Better Airflow for CHC Hotends — image 1
1 / 3

Dragon Burner v8 Cowl - Better Airflow for CHC Hotends

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Improves performance of part cooling, hotend heater, and heatsink fan.

Rating
0 / 5
Likes
10
Downloads
123
Makes
0
Views
805
Reviews
0

Updated at source:

Model information

License
GNU General Public License v3.0

First of all, many thanks to “TurtleMasterFlex” from the OrcaSlicer Discord for lending their airflow and design expertise to help with the redesign of this model. All credit to them for putting in the majority of, and most significant parts, of the work.

The original Dragon Burner v8 cowl gave me issues with the part cooling fan airflow getting up into the cavity around the hotend and overpowering the heater when the part cooling fans were set to anything greater than 50%. This was most prevalent when the toolhead was in close proximity to certain geometries like the printer's heated bed or other flat surfaces, which were not taken into account when the original CFD was done (see photos for original problem areas, which are further exaggerated in some situations). There are also issues with some airflow “dead zones” around the nozzle due to the less-than-optimal duct baffles when considering the blower fan's exit airflow (also seen in the original CFD photos).

These issues were solved by relocating the duct baffles for the right hand part cooling fan, and by adding a baffle around the bottom of the cowl to prevent the part cooling airflow from reaching into the cavity around the hotend. This results in improved performance in numerous areas, including part cooling, the hotend heater to maintain temp better and reach higher temps, and the hotend fan to cool the heatsink to prevent heat creep.

The bottom cowl baffle was shaped for use with CHC-style standard or high-flow hotends, like the Rapido or Red Lizard K1 Pro. Further re-shaping will likely be needed for hotends that utilize block/cartridge-styles, like the Dragon or E3D V6. This cowl is NOT for use with UHF/UUHF hotends that have an increased vertical distance; see the Rapid Burner toolhead (not modified with these changes) for those applications. The logo LED wire channel in the original DBv8 was removed by personal preference, but retains the logo carrier port.