LM393 light sensor case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case to hold an LM393 light sensor. I am using the LM393 to measure the pulse indicator on an electricity meter. The…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 63
- Makes
- 0
- Views
- 279
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Case to hold an LM393 light sensor. I am using the LM393 to measure the pulse indicator on an electricity meter. The sensor is plugged into a microcontroller running mysensors.org sending the data into my Home-Assistant instance
To get the sensor to fit nicely on the meter I removed the light sensor and re-soldered it flush to the board. The sensor mount can then be stuck to the meter with self adhesive hook and loop tape.
Printing:
Printed at 0.15mm layer height in PLA. No support is required.
The top clips in snuggly when you are ready to seal up the box.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
150
Infill:
20
Category: Electronics