Spare Mount for Caldwell Brass Catcher
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extra mount for a Caldwell brass catcher
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 129
- Makes
- 0
- Views
- 345
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
6/18/2026
Looks like there may be some size differences in mounts. I added a zip of alternatively-sized mounts, incrementally smaller. These are NOT TESTED because they don't fit my mount. Please let me know your successes or failures with these.
___________________________________________________________________________
Don't want to spend $20 on another mount for your Caldwell brass catcher? Here's a spare.
Threaded to use M4x5mm Hex Socket Spring Ball Plungers to have the same grip as the originals.
Recommended print orientation in pictures. Supports only necessary on the nut indent of the clip.
You will need to chase the printed threads with a 4MM-0.70 tap. Tap from the underside I recommend only tapping to where the tap is barely sticking out of the top of the mount so that when you insert the ball plungers, they are very tight in the untapped portion of the thread.
Bill of materials:
2x M4x5mm Hex socket spring ball plungers. 6mm long will work as well. (https://a.aliexpress.com/_mOWeKxd)
1x M3x25mm bolt
1x M3 Nut
1x Caldwell mount Clip (printed)
1x Caldwell mount (printed)
Message me for licensing questions.