LayersFactory
Report model
1 / 8
DJI Dual 4W Range extender (and all drones at 2.4G) — image 1
1 / 8

DJI Dual 4W Range extender (and all drones at 2.4G)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

M600

M600

@M600_23342

WARNING Comply with your local law regulation regarding transmitter power. Failing to do so expose you to fine nor jail.

Rating
0 / 5
Likes
10
Downloads
40
Makes
0
Views
955
Reviews
0

Updated at source:

Model information

Source
Printables
Category
RC & Robotics
License
Creative Commons — Attribution — Noncommercial — Share Alike
DetailsFiles (27)Makes & comments (Makes: 0) (Comments: 1)Remixes (0)Collections (10)Related

WARNING
Comply with your local law regulation regarding transmitter power.
Failing to do so expose you to fine nor jail. You're warned.

The F is that
Boosting the RC/Video link of your drone that use 2.4G with directional antenna and powered 4W booster.

Why
I wanted to strenghen my Mavic 1 Pro RC/Video signal reliability as much as I can to avoid drop nor signal lost. I tried to buy an Evolite Kit Plus but they just cancel my order and never replied to my mail... Awesome customer service isn't it. So F it, I'll do it myself.

How

  • The booster are powered using USB so bring a power bank with you. The step up will change the USB voltage from 5v to 12v (default voltage of the power supply but range is 6-12v according to the datasheet). Power consumption from the USB socket is around 0.6Ah at 5v.
  • You need to open the booster to desolder the power jack connector and replace it with bare wire sticking outside.
  • I had to invert the SMA connector side (there's one female and one male) to use the SMA wire supplied with my antenna and the booster. Just swap them. Or buy new SMA cable.

  • Be aware, booster have direction. You must use it correctly, one end is for the input the other to the antenna (hence my modification at the SMA connector).
    End goal

  • DJI Go with FCC Mod

  • Strong directional antenna

  • 4W booster per antenna
    Part list

  • 1x Third party directionnal antenna (Raptor SR, Nanosync or other)

  • 2x Wifi signal booster 4W: https://aliexpress.com/item/32839375464.html
  • 1x Step up converter XL6009: https://aliexpress.com/item/32944756517.html
  • 1x Micro USB breakout board: https://aliexpress.com/item/32622990643.html
  • 8x Neodyme magnet cylinder 5x3mm: https://aliexpress.com/item/1000007993788.html

  • M4 screws and nuts
    Print files

  • booster-usb-base : Base of the box

  • booster-usb=top : Cover for the box
  • booster-usb-bracket-extension-2cm : Extension arm of 2cm (optional)
  • booster-usb-bracket-extension-1cm : Standard extension arm of 1cm
  • booster-usb-bracket-base : Plate for the box
  • booster-usb-bracket-controller : Plate for the Raptor SR plate

Print instructions

Category: R/C Vehicles Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: No

Resolution: 0.2

Infill: 20

Filament: Colorfabb PLA/PHA
Notes:

Just drop and print, no support required.

Tags

mavicdjiremoteantennaorangeextenderboosterthingiversedjimavicdjimavicpromavicproextendedmavic2djiphantomdjiinspiredjiinspire1inspire1mavicairboostfpvantenna