1 / 1
Zenit Helios 44m-4 focus gear
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Focus gear ring for the Zenit Helios 44m-4 for use with a follow focus system
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 91
- Makes
- 0
- Views
- 361
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Even though it is a simple design it was still a bit of trial and error to get the dimensions right. This focus gear has 99 teeth and is compatible with common follow-focus system. I tested it with the Tilta Nucleus Nano. Most importantly: I did not want to put any masking tape or anything under the gear for the snug fit. It works without additional material.
I printed it with PLA (0.2 layer height) and a 0.4 Nozzle. Works totally fine.