1 / 4
MAXSpline and SplineXL bearing shims — image 1
1 / 4

MAXSpline and SplineXL bearing shims

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Preliminary estimate for PETG

€0.26 – €0.32 net (excluding VAT)

For file: Bearing Shim 1 PC - MaxSplineXL_0.4n_0.1mm_PETG_MK3.9_23m.bgcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €0.29 excluding VAT (range midpoint).

Weight reported by the author
2 g
Print time reported by the author
22.8 min
Source material
PET
Estimate material
PETG
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Quick way to fill the gaps in the large spline tubes to provide smooth bearing rotation.

Rating
0 / 5
Likes
0
Downloads
6
Makes
0
Views
29
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

SplineXL tubes are notoriously loose in bearings due to the rounded crown of the tube.  This provides little surface area to ride on the bearing.  MAXSpline is slightly better, but can use some help on occasion.

These tubes are 1 way compatible, i.e. SplineXL fits both WCP and REV products, but REV only fits REV.  The bearings are universal.  

2 models are included here.  One is a single piece intended for REV or WCP, while the 2nd is a 2 piece model that only works for WCP.  

Tags